Features:

• Provides dust free CAIROX® potassium permanganate transfer from standard 330 lb. shipping container to feeder, thus reducing potential exposure to chemical.

• Allows the entire contents of the drum to be fed without additional operator involvement.

• Allows for cordless freedom of drum transport, based on battery operation.

Standard Operation:

Remove the lid from a 330 lb. drum of CAIROX® potassium permanganate. Attach the stainless steel discharge cone to the drum with the bolt-on clamp provided. Make sure that the discharge iris valve is closed. Next, strap the drum to the lifting arms. Tighten the clamps with the ratchet handles.

Once the drum is secured to the handler, press the raise switch to lift the drum and entire assembly off the ground. Roll the drum handler to the rear of the feeder. Press the raise button until the drum is approximately 4 feet off the ground. Next, press the rotate button to invert the drum and assembly.

With the drum completely inverted, roll the drum handler and inverted drum over the inlet seal of the feeder. Take care to line up the discharge spout with the inlet seal.

Once aligned, press the "DOWN" button to lower the spout. This will engage the inlet seal.

Open the iris valve SLOWLY. CAIROX® potassium permanganate will fill the feeder. The drum is left engaged to the feeder until the entire contents of the drum have been fed.

  
For additional information, call
HOPKINS TECHNICAL PRODUCTS, INC.
1-800-732-6704

Back to Home / Index Page