HOPKINS TECHNICAL
PRODUCTS, INC.
Exclusive West Coast Representative for

Plunger head with stuff box packing. The plunger oscillates in the cylinder and displaces the liquid.

The packing adjustment is achieved by the front-sided adjusting screw, which is also possible during operation.

The lantern on the rear head end serves to drain the leakage or can be used as an area to flush, lubricate or seal the pump with suitable media.

The pump check valves are of cone type. This guarantees low wear, short pressure loss (NPSHR) and self-cleaning. All wetted parts are fabricated from stainless steel and sealed by PTFE.

Plunger pump type PS 80/100 with heating jacket

	Back to ORLITA Index Page
	Back to Home / Index Page

• Best hydraulic efficiency
• Pressure up to 400 bar
• Temperature range -40° to +400°C
• Accuracy ±0.5%
• Easy to maintain by central packing adjustment

• Special materials like Hastelloy, titanium, Alloy 20, ceramics
• Special send materials
• Pump head with heating/cooling jacket
• Other type of valve arrangements e.g. double valves etc.
• Special nozzle on request
• Other options on request

For additional information, call
HOPKINS TECHNICAL PRODUCTS, INC.
1-800-732-6704